| 1. | Analysis of the bending rigidity of wool - polyester yarns
毛涤混纺纱弯曲刚度的分析 |
| 2. | Discussion on bending rigidity anisotropy of fabrics
织物弯曲刚度各向异性探讨 |
| 3. | Study on the bending rigidity check for cnc lathe spindles
数控车床主轴弯曲刚度校验的研究 |
| 4. | Bending rigidity of yarn and fabric
纱线和织物的弯曲刚度 |
| 5. | Experimental study of equivalent bending rigidities of small corrugated plates of metal corrugated arch roof
拱型波纹钢屋盖小波纹板等效弯曲刚度试验研究 |
| 6. | Secondly , the calculation mode about bending rigidity of reinforced concrete ( rc ) member and src member is analyzed
分析比较了国内外钢筋混凝土构件及劲性钢筋混凝土构件抗弯刚度的计算模式。 |
| 7. | I t features good impact redidtance , toughness , bending rigidity , it will not be damaged when its suffering from sand blown by wind
古象铝塑复合板，耐冲击性强、韧性高、弯曲不损面漆，抗冲击力强，在风沙较大的地区也不会出现因风沙造成的破损。 |
| 8. | The influences given by process parameters of presetting and alkali deweighting on the fabric strength , elongation and bending rigidity are discussed and analyzed on the basis of experiment
通过试验分析探讨了预定型和碱减量各工艺因素对于织物的断裂强度、断裂伸长和弯曲刚度等方面的具体影响。 |
| 9. | The 1st and 2nd order perturbed identification results that represent the strengthened effects on bending rigidity of the rotor caused by the impellers and the sleeves on the shaft of the pump are given , and the modified dynamic models of the rotor are obtained
给出了给水泵转子上的热装叶轮、轴套对转子刚度产生加强作用的一、二阶摄动识别结果，得到了修正的给水泵转子系统动力学计算模型。 |
| 10. | The tensile and bending rigidities of the web and flange plates with a large number of corrugations were obtained by the tensile and bending tests . the experimental results were compared with those of flat plate with the same thickness . some important conclusions were given
通过拉伸和弯曲试验，测试了带波纹腹板和底板两个方向的等效拉伸和弯曲刚度，并与相同厚度的平板进行了比较，得到了一些重要结论。 |
